Sharp UX-41 Using TEL Mode, Answering with the fax’s handset, Receiving, Faxes, display, hang up

Using TEL Mode

Using TEL Mode

When the reception mode is set to TEL, you must answer all calls by picking up the fax machine’s handset or an extension phone connected to the same line.

To select TEL mode, press

RESOLUTION/	until the arrow in the
RECEPTION MODE
display points to TEL.
RESOLUTION/		FAX
RECEPTION MODE	TEL
	TEL/FAX	A.M.

Answering with the fax’s handset

1 When the fax machine rings, pick up the handset.

2 If you hear a fax tone, wait until the	Beep
display shows RECEIVING and then		RECEIVING
replace the handset.
Note: If you have set the Fax Signal Receive setting
(page 43) to NO, press START		to begin reception.
3 If the other party first speaks with you	START
and then wants to send a fax, press		RECEIVING
START
after speaking. (Press before the
sender presses their Start key.)
• When RECEIVING appears in the
display, hang up.

Receiving	Faxes
3.

41