Sharp UX-21, UX-41 Searching for an auto-dial number, Load the documents, Press SEARCH and then

Searching for an auto-dial number

If you don’t remember the Rapid Key or Speed Dial number in which you have programmed a particular fax number, you can search for the number by following the steps below. Once you have found the number, you can dial and transmit the

loaded document by simply pressing START .

1

2

Load the document(s).

•	RESOLUTION/
	If desired, press RECEPTION MODE to set the

resolution and/or contrast.

READY TO SEND

HOLD/

Press SEARCH and then 1 .

3 Enter the first letter of the stored name by pressing the appropriate

number key (the key below the marked letter) one or more times until the letter appears in the display. If the name begins with a special character

or number, press 1 .

•If you don’t remember the first letter, go to Step 4 (you will scroll through the list from the beginning).

• If a name wasn’t stored for the number, press 0 . This will cause

numbers, not names, to appear when you scroll.

4 Press or to scroll through the names (numbers if you pressed 0). Stop when the desired name appears in the display.

5 Press	START
	. The document will be automatically transmitted once the

connection is established.

36