Quick Guide
In this page, connection of the projector and the video equipment is explained as an example for the procedure from setup to projection. Refer to each page for details.
Required equipments
Video equipment
Projector | Remote control | Power cord |
|
| • Insert the batteries. |
|
|
| (Page 13) |
|
|
|
| Composite video cable | |
|
| (commercially available) | |
1. Place the projector facing a wall or a screen. | 6. Turn the projector on using | on the remote | |
2. Connect to video equipment. (Page 17) | control. (Page 34) |
| |
|
| ||
|
| ON button |
|
|
| INPUT 4 button | The power indicator |
|
|
| |
|
|
| illuminates blue. |
Introduction
Composite video cable | To INPUT 4 | |
(commercially available) | ||
terminal | ||
| ||
| To video out- | |
| put terminal |
7.Press on the remote control to select the INPUT 4 mode. (Page 35)
8.Turn on the video equipment.
ON
3.Connect the output terminal of the video equip- ment to the input terminal of the audio equip- ment using an audio cable.
4.Plug the power cord into the AC socket of the projector and into the wall outlet. (Page 16, 34)
5.Remove the lens cap from the lens. (Page 10)
Lens cap
Power cord
9.Play the video.
10.Adjust the image size, image position and the focus. (Page 28, 29)
Adjust the focus by | Adjust the zooming by |
rotating the focus ring. | moving the zoom knob. |
Adjust the height of the image by rotating the lens shift dial.
Note
•This projector can also be connected to a computer as well as to video equipment. (Page 22)