Sharp XV-Z12000 Using as a Wired Remote Control, Connecting the Remote Control to the Projector

Connecting the Projector to Other Devices

Using as a Wired Remote Control

Connecting the Remote Control to the Projector

When the remote control cannot be used due to the range or positioning of the projector (rear projection, etc.), connect a ø3.5 mm minijack cable (commercially available or available as Sharp service part QCNWGA038WJPZ) from the WIRED R/C JACK on the top of the remote control to the WIRED REMOTE control input terminal.

To WIRED REMOTE control input terminal

ø3.5 mm minijack cable (commercially available or available as Sharp service part QCNWGA038WJPZ)

To WIRED R/C JACK

Remote control

-26