Connecting the Projector to Other Devices
Use a component cable when connecting the component video equipment such as DVD players and DTV* decoders to INPUT 1 or 2 termi- nals.
*DTV is the umbrella term used to describe the new digital television system in the United States.
1Connect a component cable to the projector.
2Connect the above cable to the component video equipment.
Note
•When connecting the projector to the video equipment in this way, select “Com- ponent” for “Signal Type” in the “Options” menu, or select the Component mode by
pressing on the remote control. See page 69.
•Set the “Resolution” of “Special Modes” to “480P” during input of a 480P signal. See page 58.
To INPUT 1 or 2 terminals
Component cable (commercially available)
To analog component output terminal
DVD player or
DTV* decoder