Setup
Projecting a Reversed/Inverted ImageProjection from behind the screen
■Place a translucent screen between the projector and the au- dience.
■Reverse the image by setting “Rear” for “PRJ Mode” in the “Options” menu. See
page 73 for use of this function.
When using the default setting.
The image is reversed.
Projection using a mirror
■Place a mirror (normal flat type) in front of the lens.
Info
•When using a mirror, be sure to carefully position both the pro- jector and the mirror so the light does not shine into the eyes of the audience.
■It is recommended that you use the optional Sharp
■Before mounting the projector, contact your nearest Authorized SharpVision Service Center or Dealer to obtain the recommended
■Be sure to adjust the position of the projector to match the distance (z) from the lens center position (see page 31) to the
lower edge of the image, when mounting the projector on the ceiling.
■Invert the image by setting “Ceiling + Front” for “PRJ Mode” in the “Options” menu. See page 73 for use of this function.
When using the default setting.
The image is inverted.