| Turning the Power off | STANDBY | |
1 Press on the remote control | button | |
ENTER button | ||
|
or 
on the projector, then
press 
or 
again while the confirmation message is dis- played, to put the projector into the standby mode.
Note
•If you accidentally pressed 
and do not want to put the projector into the standby mode, wait until the confirmation message disappears.
2 Unplug the power cord from the AC outlet after the cooling fan stops.
Info
•Do not unplug the power cord dur- ing projection or cooling fan opera- tion. This can cause damage due to the rise in internal temperature, as the cooling fan also stops.
•When connected to equipment such as an amplifier, be sure to turn off the power to the equipment con- nected first and then to the projec- tor.
MENU button
", ', \,
buttons
Operation Basic
-37