Specifications
Product type | Projector |
Model | |
Video system | NTSC 3.58/NTSC |
| DTV480I/DTV480P/DTV720P/DTV1080I |
Display method | DLP chip, RGB optical shutter method |
DLP panel | Panel size: 0.8" |
| Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments |
| Drive method: Digital Light Processing (DLP™) |
| No. of dots: 921,600 dots (1,280 [H] ⋅ 720 [V]) |
Lens | |
Projection lamp | 270 W SHP lamp |
| Y (luminance signal): 1.0 |
C(chrominance signal): Burst 0.286
Y:1.0
PR: 0.7
Horizontal resolution | 520 TV lines (NTSC 3.58 input), 750 TV lines (DTV 720P input) | ||
RGB input signal | |||
| <Digital> |
| 50 Ω |
| Input impedance | ||
| Input level | ||
| <Analog> |
| 75 Ω |
| Input Impedance | ||
| Input level | 0.7 | |
| <Synchronization signal> |
•Separate sync / Composite sync
| Input level TTL level |
|
| |
| Input impedance | 1 KΩ |
|
|
| • Green on sync |
|
|
|
| Input level (Synchronizing input) 0.286 |
| ||
| Input Impedance | 75 Ω |
|
|
Video input signal | RCA Connector: VIDEO (INPUT 4), composite video, 1.0 | |||
| terminated |
|
|
|
Computer control signal |
| |||
Pixel clock |
|
|
| |
Vertical frequency |
|
|
| |
Horizontal frequency |
|
|
| |
Rated voltage | AC |
|
|
|
Input current | 3.7 A (When using AC 100 V) |
|
| |
Rated frequency | 50/60 Hz |
|
|
|
Power consumption (normal) | 365 W |
|
|
|
Power consumption(standby) | About 0.1 W (When using 100 V) |
| ||
Heat dissipation | 1,400 BTU/hour |
|
|
|
Operating temperature | 41°F to 95°F (+5°C to +35°C) |
|
| |
Storage temperature |
| |||
Cabinet | Plastic |
|
|
|
I/R carrier frequency | 38 kHz |
|
|
|
Dimensions (approx.) | 18 11/16" ⋅ 7" ⋅ 15 49/50" (475 (W) ⋅ 178 (H) ⋅ 406 (D) mm) (main body only) |
| ||
| 18 11/16" ⋅ 7" ⋅ 19 1/2" (475 (W) ⋅ 178 (H) ⋅ 496 (D) mm) (including terminal cover) | |||
Weight (approx.) | 20.7 lbs. (9.4 kg) |
|
|
|
Supplied accessories | Remote control, Two AA size batteries, Power cord (9'10", 3.0 m), Terminal cover, Lens cap | |||
| (attached), SharpVision Manager Software | |||
| SharpVision Manager operation manual |
| ||
Replacement parts | Lamp unit (Lamp/cage module) | |||
| AA size batteries , Power cord (CACCDA024DE01), Terminal cover (CCOVA1985CE03), | |||
| Lens cap (PCAPH1056CESA), SharpVision Manager Software | |||
| Projector operation manual | |||
|
|
|
| |
This SHARP projector uses a DMD Chip. This very sophis- | This unit has some inactive pixels within acceptable toler- | |||
ticated panel contains 921,600 pixels. As with any high tech- | ances which may result in inactive dots on the picture screen. | |||
nology electronic equipment such as large screen TVs, video | This will not affect the picture quality or the life expectancy | |||
systems and video cameras, there are certain acceptable | of the unit. If you have any questions about this matter, | |||
tolerances that the equipment must conform to. |
| please call toll free | ||
|
|
|
|
|
Specifications are subject to change without notice. | U.S.A ONLY | |||
|
Appendix