Connecting to RGB Video Equipment Using a 5 RCA RGB Cable (INPUT 1 or 2)

Use a 5 RCA RGB cable when connecting the RGB video equipment such as DVD players and DTV* decoders to INPUT 1 or 2 terminals.

*DTV is the umbrella term used to describe the new digital television system in the United States.

1Connect a 5 RCA RGB cable to the projector.

2Connect the above cable to the RGB video equipment.

Note

•When connecting the projector to the video equipment in this way, select “RGB” for “Signal Type” in the “Options” menu,

or select the RGB mode by pressing on the remote control. See page 69.

•The (HD/C sync) and (VD) terminals may be used depending on the specifications of the DTV decoder connected to this pro- jector. Please refer to the operation manual of the DTV decoder for details.

Connecting to RGB Video Equipment Using the DVI to 15-pin D-sub Adaptor and the RGB Cable (INPUT 5)

1 Connect a DVI to 15-pin D-sub adaptor to the projector.

2 Connect the above adaptor to an RGB cable.

3 Connect the above cable to the RGB video equipment.

•Secure the connectors by tightening the thumbscrews.

Note

•When connecting the projector to the video equipment in this way, select “A. RGB” for “Signal Type” in the “Options” menu, or se-

lect the A. RGB mode by pressing on the remote control. See page 69.

To INPUT 1 or 2 terminals

5 RCA RGB cable

Connections

and

(Commercially available)

Setup

To analog RGB

 

output terminal

 

 

DVD player or

 

DTV* decoder

Optional

accessory

DVI to 15-pin D-sub adaptor

Type: AN-A1DV (7.9" (20 cm))

To INPUT 5 terminal

DVI to 15-pin D-sub adaptor (sold separately)

RGB Cable (commercially available)

To RGB output terminal

DVD player or

DTV* decoder

-19