Checking the Input Signal

This function allows you to check the current input signal information.

Select “Signal Info” in the “Fine Sync” menu on the menu screen.

➝For operating the menu screen, see pages 42 to 45.

Auto Sync Adjustment

Used to automatically adjust a computer image.

Select “Auto Sync” in the “Fine Sync” menu on the menu screen.

➝For operating the menu screen, see pages 42 to 45.

Note

When setting to “ Normal” or “ High Speed”:

•Auto Sync adjustment will occur when the projector is turned on or when the inputs are switched, while connected to a com- puter.

Manual adjustments should be per- formed:

•When the optimum image cannot be achieved with Auto Sync adjustment. See page 57.

•Auto Sync adjustment may take some time to complete, depending on the im- age of the computer connected to the projector.

•When setting “Auto Sync” to “OFF” or

“High Speed”, and if is pressed, Auto Sync will be executed in “High Speed” mode. If the button is pressed again within one minute, Auto Sync will be ex- ecuted in “Normal” mode.

Screen display during Auto Sync

AUTO SYNC button

Operation Basic

-59