Adjusting Computer Images

Selecting Adjustment Settings

Adjustment settings stored in the projector can be easily accessed.

Select “Select Setting” in the “Fine Sync” menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45.

Note

•If a memory position has not been set, a resolution and frequency setting will not be displayed.

•When selecting a stored adjustment set- ting with “Select Setting”, you can set the projector in the stored adjustments.

Special Mode Settings

Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. However, for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu screen may need to be selected to match the computer display mode.

Set the resolution by selecting “Special Modes” in the “Fine Sync” menu on the menu screen.

➝For operating the menu screen, see pages 42 to 45.

Note

•Avoid displaying computer patterns which repeat every other line (horizontal stripes). (Flickering may occur, making the image hard to see.)

•When a DVD player or Digital Video is con- nected, select 480P as the input signal.

•See “Checking the Input Signal” on the next page for information on the currently se- lected input signal.

-58