Setup

Using the Adjustment Feet

The height of the projector can be adjusted using the adjustment feet when the projector is placed on an uneven surface or when the screen is slanted.

The position of the projected image can be made higher by adjusting the projector when it is in a location lower than the screen.

1 Press the foot releases and lift the projector to the desired angle.

2 Remove your hands from the foot releases. Once the adjustment feet have locked in posi- tion, release the projector.

•If the screen is at an angle, the ad- justment feet can be used to adjust the angle of the image.

Note

•The projector is adjustable up to approxi- mately 5 degrees from the standard posi- tion.

•When the height of the projector is ad- justed, the image may become distorted (keystoned), depending on the relative positions of the projector and the screen. See page 38 for details on the keystone correction.

Info

•Do not hold the lens when lifting or lower- ing the projector.

•When lowering the projector, be careful not to get your finger caught in the area between the adjustment foot and the projector.

Foot releases

Adjustment feet

and Connections Setup

-27