Selecting the Economy Mode

Automatic Power Off

Function

Select “Auto Power Off” in “Economy Mode” under the “Options” menu on the menu screen.

•“Auto Power Off” is switched “ON” and “OFF” by pressing .

➝For operating the menu screen, see pages 42 to 45.

Selected Item

Description

(ON)

When no input signal is

 

detected for more than 15

 

minutes, the projector will

 

automatically enter the standby

 

mode.

(OFF)

The Auto Power Off function

 

will be disabled.

Note

•When the Auto Power Off function is set to “ON”, 5 minutes before the projector enters the standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.

•When Auto Power Off function is set to “OFF”, “LED” is set to “ON” automatically. Be sure to set Auto Power Off function to “ON” to use LED Off function. (See page 67.)

Selecting the Transmission Speed (RS-232C)

This menu allows you to adjust the transmission speed of the RS-232C connection by selecting the baud rate.

Selecting the Transmission Speed (RS-232C)

Select “RS-232C” in the “Options” menu on the menu screen.

➝For operating the menu screen, see pages 42 to 45.

Note

•Make sure that both the projector and com- puter are set for the same baud rate. Refer to the computer’s operation manual for instruc- tions for setting the computer’s baud rate.

-72