Selecting the Economy Mode

These functions allow you to reduce the power consumption of the projector.

Setting the Power Save

Select “Power Save” in “Economy Mode” under the “Options” menu on the menu screen.

•“Power Save” is switched “ON” and “OFF” by pressing .

➝For operating the menu screen, see pages 42 to 45.

Selected Item

Description

 

(ON/Low

Although noise is reduced when

 

Power mode)

“Power Save” is set to “ON”,

 

 

brightness decreases by 20%.

 

(OFF/

“Power Save” mode is factory

 

Standard mode)

preset to “OFF”.

 

 

 

 

 

 

 

 

 

 

RS-232C Off Function

This projector consumes power when using a computer connected to the RS-232C terminal. When not using these terminals, “RS-232C Port” can be set to “OFF” to reduce standby power consumption.

Select “RS-232C Port” in “Economy Mode” under the “Options” menu on the menu screen.

•“RS-232C Port” is switched “ON” and “OFF” by pressing .

➝For operating the menu screen, see pages 42 to 45.

Selected Item

Description

(ON)

RS-232C connection is set to “ON”.

 

The RS-232C is operating at all

 

times (to accept communications).

(OFF)

RS-232C connection is set to

 

“OFF”. RS-232C does not

 

operate when the power supply

 

is in standby.

Note

•Set “RS-232C Port” to “ON” when using the SharpVision Manager Software.

Status

Brightness

Lamp power

consumption

 

 

ON

80%

220 W

(Low power mode)

 

 

OFF

100%

270 W

(Standard mode)

 

 

to Easy Functions Use

-71