Sharp ZQ-2400, ZQ-2200, ZQ-2000 manual Making corrections, Entering the new-line character ‘2

2. Switch to the next set of symbols.

ml

Each time m[is pressed, a new set of 5 symbols will appear in sequence.

3. Enter I‘?“.

Press IIIwhen a ‘I?” appears next to the number one.

I

Note: When you press mi , the previous set of symbols reappears. The initial symbol display is thus determined by your previous

choice . The 5 most recently used symbols and characters will appear in the initial symbol display.

Nate: To exit the symbol entry mode, press -1 _

Entering the new-line character ‘2”

Enter the “cl” character to continue entry on the next line by preS+SinCJ

F’J , Then the cursor moves to the beginning of the next line.

Making corrections

Misspellings and incorrect entries can be corrected using the cursor keys as well as -1 I]and I= m as follows:

Correcting misspellings

If you have entered “NEW YARK” for “NEW YORK”, for example, the entry may be corrected as follows:

1.Enter the incorrect spelling. -1 NEW YARK

1 5