Be sure to perform the following procedures before using the Organizer for the first time:

1. Remove the insulation sheet.

Note: When you remove the insulation sheet, write down the date on the label on the back of the Organizer (refer to page 101).

2. Initialize the Organizer.

While holding [ml , press the RESET switch on the back. Release

the RESET switch and then release m] . The following display will appear:

Data has been broken! C l e a r a l l

CAPS i’

Note: Under certain conditions the message may appear as “DATA ALL CLEAR OK (Y/N)?“. Proceed to the next step in either case.

Press vi .

* TEL 1 4 NAME ?

CAPS i’

The Organizer is initialized and then the TEL1 directory is displayed. ,

Page 6
Image 6
Sharp ZQ-2200 Data has been broken! C l e a r a l l, TEL 1 4 Name ?, Remove the insulation sheet Initialize the Organizer