The Secret function allows you to protect confidential data with a password so that no unauthorized person can access it. You may mark certain entries as private; displaying or modifying such data requires the password. Data can also be classified from the SCHEDULE, TEL, and MEMO modes.

Registering a password

Press I]-1 and the password entry prompt will ap- pear, then enter your password. Press -1 . The secret function

is now set to operate and “ q ” will appear. The password can contain up to seven letters, numbers, spaces, or symbols (except a ). To recall

the password successfully, you must enter it exactly as you entered it,

without, for example, changing capital letters to small or vice versa.

important: If you ever forget the password, you will have to erase all

your secret data. Make sure the password is one you will

never forget.

To register “1234” as the password, for example:

1.Recall the password entry prompt. piTwl ri%EEEq

PASSWORD SET

II - 1

Note: If a password has been previously registered, “SECRET OFF” will

be displayed instead. forget the password” on and secret data.

If this occurs, refer to “What to do if you page 82 and delete the previous password

7 5

Page 68
Image 68
Sharp ZQ-2000, ZQ-2200, ZQ-2400 manual Registering a password, Password SET