4.Replace the cover.

5.Set the battery replacement switch back to NORMAL OPERATION (the red dot disappears).

*The Organizer will not function unless the battery replacement switch is in the NORMAL OPERATION position.

Initializing

The Organizer must be initialized when it is used for the first time.

1.Press and hold the [ON] key.

2.While holding down the [ON] key, push the RESET button on the bottom of the Organizer using a pen or some other pointed object. The following message will appear.

Dn CJOU reallr w a n t t o ini tCali?r

t.hr orsanizer’s mrmnrr <this w i l l delete a l l d a t a ) ?

3.Press [v] to select the Name Field Setting.

The Name Field Setting window appears.

Please determinr t h e otxkr that YOU want . to view t.hc First and Lost Namrs

Plrase +elect, either ortinn [ 11 nr [ 2 1

J

4.Press 1 or 2 to select the desired name order. Press [ENTER] when you have finished.

5.Or you can press [N] to initialize the Organizer rather than to select the Name Field Setting.

The LCD Contrast screen then appears.

6.If the display is not clear, press [A] and [v] or [PREV] and [NEXTJ until the display is satisfactory.

7.Press [ENTER] when ready.

The message “Working...Please Wait.” appears while the Organizer proceeds with the initialization procedure.

The Organizer then automatically starts the SETUP utility, so that the owner information, the time and date and various other settings are defined before use.

Page 10
Image 10
Sharp ZQ-630, ZQ-640, Z&650 operation manual Initializing, Press Enter when ready