Sharp Z&650, ZQ-640, ZQ-630 operation manual Keyboard, Display symbols

DESCRIPTIONi

The keyboard

The Organizer’s keyboard has a standard layout, just like a typewriter or computer. [Q ] works just like the Shift key on a typewriter or computer, and [2nd] [Q] is like the Caps Lock key.

Above the keyboard are the special keys used to start the Organizer’s various applications, work with the various menus and control the cursor on the screen.

Symbols in white above a key such as ’ or : can be accessed by holding down [Q] and then pressing the appropriate key.

Functions in blue above a key, such as HELP: can be accessed by pressing the particular key after pressing [2nd]. There is no need to hold down [2nd] while you press the desired key.

The 2nd key can also be used as a convenient way of entering some alternative characters commonly used in European languages. To enter one of these characters (appearing in blue above certain keys on the keyboard), press the 2nd key followed by the corresponding key.

*Special symbols and characters, such as “&“, “2” and “/“, can also be entered by using [SMBL]. For a full explanation, see P.71.

Display symbols

The following symbols appear at the bottom of the screen to I indicate various operating conditions.

*		c
	This symbol appears at the bottom of the display	I,
	to indicate that the current entry (in View or Edit
	mode) has been marked as Secret.

?&4--bThese symbols indicate that all information in an entry cannot be shown simultaneously on the

	display. The additional entries or fields which
	cannot fit onto the display can be viewed by
	pressing the displayed arrow keys.
2nd	The [2nd] key has been pressed.
	The operating batteries are weak and need to be
	replaced (see p.90)
CAPS	[2nd] [Q] has been pressed. In caps lock mode,
	all typed letters will be in upper case. Press [2nd]
	[ 9 ] again to turn off caps lock.

aThe Organizer is locked. Entries marked as secret cannot be accessed without first entering the password and unlocking the Organizer (see ~63).

EDIT The entry on the display can be edited.

aAll alarms are enabled. When this symbol is not shown, the alarm sound for any alarms that have been set is disabled (see p.60).

15