Sharp ZQ-630, ZQ-640, Z&650 Transferring Data, Transferring between two Xl-650 Organizers

Transferring Data

There are several ways to transfer information - whether specific entries or entire files - between the Organizer and other information processing devices, including personal computers and other SHARP Organizers. In this way, you can back up your information to guard against losing it, or copy information so that you or someone else can work with it on another device. A summary of transfer devices, transferable data, and tasks to which a transfer device is most suited is provided in the table

Transferable data and Peripherals

~~~~~

	ZQ-630/ 640/ 650)
Another ZQ-630/	Single entrles. entlre	4 PI” cable		Exchanging data
ZQ-6401 ZQ-650	filesiappllcatlons	IRDA		with other ZQ-6301
Organizers				6401650
(see p 74 and 77)	.			Organizers
ZQ4000se”es, -	-	4 pin cable		can only rece,ve
ZQ5000 series				data
organizers
(see p.77)
Personal	>	Docking Statlo”	or	PC
Computer		IRDA		synchronlzatlo”
(see P.78)

*Only ZQ-650 Organizer has the function of infrared transfer.

*Depending upon the SHARP or third-party software you are using, some features and capabilities may vary.

*The Auto power off function (see p.12) is disabled in all transfer modes.

When transferring data from other models, only entries in a mode (application) supported on the ZQ-6301 6401 650 Organizer can be sent.

Transferring between two Xl-650 Organizers

Data can be transferred directly between two ZQ-650 Organizers via the infrared port. Single entries or all the entries in an application can be transferred in the Schedule, To Do, Ann, Memo, Expense, Tel and User File applications.

The transfer procedure differs according to whether single entries or complete files are to be transferred.

*Press [ON] at any time to interrupt and cancel a transfer.

*After a transfer, the display returns to the application being used before the transfer procedure was begun.

*No peripheral devices are required to transfer data via the infrared port. However, infrared transfers are easily affected by ambient conditions which may interfere with thistype of transfer. Connecting the two units directly using the 4 pin cable will ensure a morereliable transfer. See p.76

74