Sharp Z&650, ZQ-640 Daylight Saving Time DST, Disabling all alarms, Assigning DST to a city

Daylight Saving Time (DST)

Assigning DST to a city

Designating Daylight Saving Time (DST) for a city automatically sets the time for that city one hour ahead of its regular time.

1.Press [MENU] to open the Clock menu.

2.Select either CHANGE LOCAL CITY or CHANGE WORLD CITY (it doesn’t matter which you choose).

3.Select the desired city using [ A 1, [ v 1, [PREV] and [NEXT&

4.Press [J].

A symbol appears to the left of the city, indicating that DST is in effect.

5.Press [ENTER].

To de-assign a city’s DST setting, simply follow the above procedure and press [ 41 again (this toggles DST between on and off).

Enabling and disabling DST

Once DST is assigned to a city, it remains in effect until it is de- assigned. Rather than having to de-assign DSTfor each city

separately, you can simply disable the Organizer’s DST feature itself, which then applies to all cities within the Organizer. When these cities switch back to DST, you can simply re-enable the feature without having to change any city’s entry.

1.Press [MENU] to open the Clock menu.

2.Select ENABLE DST

3.The current DST setting (enabled or disabled) is indicated by a tick. Select ENABLE DST to change the setting.

When DST is disabled, the DST symbol disappears from the Clock display.

Disabling all alarms

Once you have set an alarm, it will sound at the appropriate time whether the Organizer is turned on or off. When the organizer is on, 0 at the bottom of the display indicates that any alarm that is set will sound at the appropriate time.

There may be times when you do not want to hear any of the set alarms. You can disable all Schedule alarm sounds easily with a single operation.

1.Press [MENU] three times to open the TOOLS menu.

2.Select ALARM SOUND ON.

Thea disappears from the display. All alarm sounds are now

60