Siemens user manual Volt 6210U Power Supply 6220U

Extended Point-to-Point:

		6210U	100	1900' max.	100
	U	or				TE
to Network
		6220U

Set phone termination to 100 ohms.

Set TE termination (internal or external) to 100 ohms.

Line and Power Connections

U models are powered on pin 7 (-) and pin 8 (+) of the U IN jack. PS1 and PS2 output power is supplied on the S/T OUT jack to power an additional terminal.

•Using an 8-conductor line cord, connect the U IN jack on the telephone to the line jack. Route the cord under the guide tabs in the phone base. An additional terminal may be connected to the S/T OUT jack.

•Connect the network line to the power supply (Tone Commander Part No. 901042 or equivalent), and the power supply output to the U IN jack on the phone as shown.

to Network

48 Volt		6210U
Power	U	or
Supply		6220U

Handset/Headset

•Plug the supplied handset or a compatible headset into the jack on the left side of the telephone.

22Tone Commander 6210/6220 User Manual