Bridging a Shared Call Appearance ________

You can bridge (connect to) an active call on a call appearance that is shared with other terminals, unless call privacy is enabled at the network.

Press the busy Call Appearance key for the call you want to bridge.

Lift the handset or press the Spkr key.

The call duration timer begins when you are connected to the call.

To disconnect from the call, replace the handset or press the Spkr key. The other parties will remain connected.

Displaying Call Appearance Information ____

Call

Done

Press the Call key.

Select ID (Shortcut – you can skip this step and immediately press Call Appearance keys).

Press Call Appearance keys.

Network call information will be displayed for currently active keys.

"NO CALL INFORMATION" and the assigned directory number, if available, will be displayed for idle keys.

Press the Call or Done key when finished.

Holding Calls ___________________________

Press the Hold key or another Call Appearance key to place the currently connected call on hold.

The held call appearance indicator will wink with a green light.

Press the held Call Appearance key to return to the call.

8Tone Commander 6210/6220 User Manual

Page 11
Image 11
Siemens 6220, 6210 user manual Bridging a Shared Call Appearance, Displaying Call Appearance Information, Holding Calls