Feature Activator Keys

Feature Activator keys must be configured to match network feature activator codes that have been assigned to your line.

Using the dial pad, enter the feature activator code assigned by your network service provider.

If you need to make corrections while entering numbers, select ÅBKSP (backspace) to delete the previous digit.

10=NETWORK FA#59 (CALL)

BKSPCALL

Select CALL if a call needs to be originated when the feature is activated. When enabled, (CALL) will appear in the top line of the display as shown above.

With CALL enabled, the feature is always activated within the context of a call. Features that need to originate a call include Call Forward (on Siemens EWSD), ICM intercom (on Nortel DMS-100), and Call Pickup. The CALL feature is not used with Lucent 5ESS Custom ISDN.

If the phone is on-hook when a Feature Activator key with CALL enabled is pressed, a new call will be originated. If the phone is already off-hook when the feature key is pressed, the feature will be activated within the context of the current call.

Done Press the Done key twice to return to the key selection menu or the Setup key to exit Setup Mode.

Tone Commander 6210/6220 User Manual

33

Page 36
Image 36
Siemens 6210, 6220 user manual Feature Activator Keys, 10=NETWORK FA#59 Call Bkspcall