Speed Dial Programming
From the User Options menu, select SPDIAL. (Setup → USER → SPDIAL)
The current state of each multifunction key is shown by the its status indicator.
Green – unused key, available for speed dial use.
Red – Speed Dial key that has already been programmed.
Off – key set up for a call appearance, feature activator, or DSS.
On the phone or expansion module, press a lit key to program it for speed dialing.
The selected key’s indicator will alternately flash red and green.
The currently programmed dial string, if any, will be shown in the display.
DIAL#=5553491000
BKSP CLEAR PAUSE
Enter digits (24 maximum) with the dial pad.
Done When all digits have been entered, press the Done key to return to key selection or the Setup key to exit Setup Mode.
If you need to make corrections while entering numbers, select ÅBKSP (backspace) to delete the previous digit.
CLEAR removes all digits, allowing you to start over. A Speed Dial key will revert to 'Unused' if saved with a cleared dial string.
“Smart” Pauses
The first pause in a dial string will delay dialing until the call is answered; additional pauses delay dialing for one second. Enter multiple pauses to increase the delay time. Pauses are entered with the PAUSE softkey, and are shown in the display as a P character.
56Tone Commander 6210/6220 User Manual
