Setting Up the Call Directory _______________

Up to 36 numbers can be stored in the Call Directory. Directory entries are similar to Speed Dial keys, but are accessed from a display menu. Place your most frequently-dialed numbers on Speed Dial keys, if available, and put other numbers in the directory.

Directory entries are displayed on nine screen pages, with four entries per page. The current directory page number (1-9) will be shown at the upper right corner of the display.

From the User Options menu, select DIR. (Setup USER DIR)

Select a directory page by pressing a dial pad key (1-9), or

press the More4key to cycle through the nine pages until the

More desired page is displayed.

Select a directory entry by pressing the softkey below the name display.

You can edit an existing entry, or add a new one by pressing a softkey below a blank entry.

SELECT A SOFTKEY PAGE1\

Jim G Home

Using the dial pad, enter a name (5 characters max.) to identify the directory entry. Press the dial pad key repeatedly until the desired upper case letter, lower case letter, or number appears in the display. For example, to enter the letter ‘L’, press the 5 key 3 times. Spaces and punctuation can be entered with the # and keys.

Press the More4key to move to the next character.

If you need to make corrections while entering the name, select ÅBKSP (backspace) to delete the current character and move back to the previous one.

DIRECTORY NAME:Steve

BKSP CLEAR MOVE NUMBER

Tone Commander 6210/6220 User Manual

57

Page 60
Image 60
Siemens 6210, 6220 user manual Setting Up the Call Directory, Select a Softkey PAGE1, Bksp Clear Move Number