Interface to the User Program in the S7-200 CPU
Bank 1: Diagnostics on the AS-Interface
The delta list of the
The delta list contains deviations of the existing
A set bit can indicate the following:
SMissing slaves
SExtra slaves (not in the configuration)
SSlaves with incorrect I0/ID coding
The delta list is updated both in the configuration and in the protected mode.
The bytes and bits of the delta list are ordered as shown in the table below. (m: start address of the analog input area of the CP
Byte \ Bit
Byte m+0
Byte m+1
Byte m+2
Byte m+3
Byte m+4
Byte m+5
Byte m+6
Byte m+7
Bit 7 |
| Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
|
|
|
|
|
|
|
|
|
Slave 7 | Slave 6 | Slave 5 | Slave 4 | Slave 3 | Slave 2 | Slave 1 | Slave 0 | |
Slave 7A | Slave 6A | Slave 5A | Slave 4A | Slave 3A | Slave 2A | Slave 1A | Slave 0A | |
|
|
|
|
|
|
|
|
|
Slave 15 | Slave 14 | Slave 13 | Slave 12 | Slave 11 | Slave 10 | Slave 9 | Slave 8 | |
Slave 15A | Slave 14A | Slave 13A | Slave 12A | Slave 11A | Slave 10A | Slave 9A | Slave 8A | |
|
|
|
|
|
|
|
|
|
Slave 23 | Slave 22 | Slave 21 | Slave 20 | Slave 19 | Slave 18 | Slave 17 | Slave 16 | |
Slave 23A | Slave 22A | Slave 21A | Slave 20A | Slave 19A | Slave 18A | Slave 17A | Slave 16A | |
|
|
|
|
|
|
|
|
|
Slave 31 | Slave 30 | Slave 29 | Slave 28 | Slave 27 | Slave 26 | Slave 25 | Slave 24 | |
Slave 31A | Slave 30A | Slave 29A | Slave 28A | Slave 27A | Slave 26A | Slave 25A | Slave 24A | |
|
|
|
|
|
|
|
|
|
Slave 7B | Slave 6B | Slave 5B | Slave 4B | Slave 3B | Slave 2B | Slave 1B | Slave 0B | |
Slave 15B |
| Slave 14B | Slave 13B | Slave 12B | Slave 11B | Slave 10B | Slave 9B | Slave 8B |
Slave 23B |
| Slave 22B | Slave 21B | Slave 20B | Slave 19B | Slave 18B | Slave 17B | Slave 16B |
Slave 31B |
| Slave 30B | Slave 29B | Slave 28B | Slave 27B | Slave 26B | Slave 25B | Slave 24B |
Banks 2±15: Response data on the AS-Interface
These banks contain the response data of the command calls. The data structures used and the codings are described in Section 5.2. The number of banks used depends on the particular command.
Banks 16±30: Reserved area
These areas are reserved for later expansions and cannot be used.
Bank 31: Binary input data of the AS-i slaves 1B ± 31B
Via these analog input words, you have access to the binary inputs of the B slaves (slaves with the extended addressing mode).
The structure of the input data is described in Section 3.1.
SIMATIC NET CP | |