Data Exchange in the Stop Mode of the S7-22x CPU | Siemens CP 243-2

Access to the Data of the AS-i Slaves

Data Exchange in the STOP Mode of the S7-22x CPU

In the STOP mode, the S7-22x CPU sets bit PLC_RUN in the digital control area

to ª0º automatically. As a result, the CP 243-2 outputs ª0º data to all binary slaves.

Special Feature of Analog Slaves

If you use analog slaves complying with profile 7.3 or 7.4 the following points apply:

SIn the input direction, the CP 243-2 sets the nibbles assigned to the slaves to ª0º.

SIn the output direction, the CP 243-2 ignores the nibbles assigned to these slaves.

SAccess to the analog data is described in Section 3.1.2.

SIMATIC NET CP 243-2 AS-i Master	3-5
C79000-G8976-C142/02

Image 53

Siemens CP 243-2 Data Exchange in the Stop Mode of the S7-22x CPU, Special Feature of Analog Slaves

Contents

Manual AS-Interface MasterAppendix 07/2000 C79000-G8976-C142 Release Qualified Personnel Safety GuidelinesCorrect Usage Trademarks Preface We recommend the following procedure whenPurpose of the Manual Requirements Preface Contents Dealing with Problems / Error Displays Signaling Errors and Diagnostics in the User ProgramCommand Interface References Simatic NET ± Support and Training Glossary Index Contents Technical Description and Installation Instructions General Notes on Operation ± Safety Warnings DP Slave and AS-i Master Uses of the ModuleAS-i Master Components Supplied Explanation/Values Technical Specifications of the ModuleFeature Possible Restrictions Installing the ModuleSlots in the S7-200 Connection, Display and Control Elements Front Panel ± Access to all Functions Connections to the AS-i Cable Terminal BlockConnections Technical Description and Installation Instructions Extended Operation Modes of the CPStandard Operation Changing the Display Status ± Display Button Displays and Operator ControlsMeaning of the LEDs SET Button Interpreting the Status Display Status DisplayLED color Status LED color Status SF red System error Meaning Slave Display Characteristics of the Slave DisplayInterpreting the Slave Display Status Display Statuses in Detail Example of a Slave Display Example of a Slave Display Configuration Mode Configuring the AS-Interface with the SET ButtonProtected Mode Interpreting the Display Status Configuring Preparing to Configure Technical Description and Installation Instructions Interface to the User Program S7-200 CPU CP 243-2 as Expansion Module in the S7-200 OverviewS7-200 CPU Digital Module Analog Module Address Areas Addressing the CP 243-2 in the S7-200 CPUExamples CPU CPU 14 DI 10 do Example of a CPU 224, a CP 243-2 and a CP Module CPU 14DI 10 do Overview Meaning of the Data in the Digital Module Meaning Identification Register in the Digital ModuleRange of Values Example Meaning for the User Program Error Register in the Digital ModuleExample of Access to the Error Register Structure of the Status Byte Status Byte Input Register 8DIDescription of the Bits Bit Value Structure of the Control Byte Control Byte Output Register 8DOBit Value Meaning Digital module 8DI/8DO Meaning of the Data in the Analog Module Identification Register in the Analog Module Bit Description/Range of Values Error Register in the Analog ModuleStructure of the Error Register Example of Access to the Error Register Access in the User Program Access to the Analog Input and Output WordsPrinciple Advantage Interface to the User Program in the S7-200 CPU S7-200 CPU Analog Input AreaAssignment of the Input Areas Banks 2±15 Response data on the AS-Interface Bank 1 Diagnostics on the AS-InterfaceBanks 16±30 Reserved area Bank 31 Binary input data of the AS-i slaves 1B ± 31B Banks 48±63 Reserved area Banks 32±47 Analog input data of the AS-i slaves Bank 1 reserved Analog Output AreaAssignment of the Output Areas Banks 32±47 Analog output data of the AS-i slaves Banks 2±15 Command data on the AS-InterfaceBank 31 Binary output data of the AS-i slaves 1B ± 31B Access to the Data of the AS-i Slaves Access to the Binary Values Bit 7±4 Bit 3±0 Bank Byte no Reserved Slave 1B Special Feature of Analog Slaves Data Exchange in the Stop Mode of the S7-22x CPU Output byte AS-i slaves Data Access with Micro Access to the AS-i User Data Bank Byte no Meaning Access to the Analog ValuesAssignment of the AS-i Analog Data Simatic NET CP 243-2 AS-i Master C79000-G8976-C142/02 Access to the Data of the AS-i Slaves Access to the Data of the AS-i Slaves Access to the Data of the AS-i Slaves Access to the Data of the AS-i Slaves Special Situations Representation of the Analog Values SBR 4 STL Access to the AS-i Analog Data Access to the Data of the AS-i Slaves Signaling Errors and Diagnostics User Program Error Signaling Signaling STL Example Example Reading the Delta List Signaling Errors and Diagnostics in the User Program Command Interface Command Buffer and Response Buffer Command interface of the CP AS-i master User program Reaction to command Command Sequence SBR 3 STL Example Q1.0 Select bank AIW0, VW512 Name Description of the AS-i CommandsParameter Return LPF Bank Byte Meaning / Content General Structure of the Command Buffer Bank Byte General Structure of the Response Buffer Command Status Bit Slave address General Structure of the AS-i Slave Address Purpose SetPermanentParameterStructure of the Job Data in the Send Buffer Structure of the Job Data in the Receive Buffer GetPermanentParameter WriteParameter Purpose of the Command ReadParameter StoreActualParameters Extended ID2 code SetExtendedPermanentConfigurationID code GetExtendedPermanentConfiguration StoreActualConfiguration GetExtendedActualConfiguration SetExtendedLPS SetOfflineMode Reserved Mode SelectAutoprogramming SetOperationMode ChangeAS-iSlaveAddress End bit error detected Parity error detected Error detectedRead error in non-volatile memory GetAS-iSlaveStatus Reserved GetLPS, GetLAS, GetLDS, GetFlags Bit Number Meaning Flag Meaning of the Flags GetExtendedTotalConfiguration Idcode slave Ext ID1 slave Command Interface Command Interface Reserved Parameter slave 1B StoreExtendedTotalConfiguration Idcode slave Ext ID1 Slave Configuration slave Ext ID2 slave Command Interface Command Interface Configmode Autoaddrenable Echo of the command number 3A H Command status WriteExtendedParameterList Echo of the command number 3C H Command status ReadExtendedParameterEchoList Command Interface Purpose ReadVersionID Reserved ID code ReadAS-iSlaveID Reserved Extended ID1 code ReadAS-iSlaveID1 Irrelevant Extended ID1 code WriteAS-iSlaveExtendedID1 Reserved Slave ID2 ReadAS-iSlaveID2 ReadAS-iSlaveI/O Reserved Configuration GetLPF WriteAS-iSlaveParameterString Byte Meaning ReadAS-iSlaveParameterString ReadAS-iSlaveIDString ReadAS-iSlaveDiagnosticString Structure of the Response Buffer Structure of the Command BufferReadDataandDeltaList Delta Slave Reserv Slave 7B Slave 6B Command Interface Dealing with Problems / Error Displays You can now replace the defective slave as follows Simple Replacement of AS-Interface SlavesDetecting Defective AS-Interface Slaves Possible Cause Remedy Error Displays of the CP 243-2 / Remedying ErrorsError Error Possible Cause Remedy Dealing with Problems / Error Displays Dealing with Problems / Error Displays Comment / Function implemented by / Section Pics for the CPList of Master Functions Available Function or Call on the Host Interface AS-Interface Protocol Implementation Idcod AS-Interface Protocol Implementation Simatic S7-200 References References Order numbers Product Name Installation InstructionsEU Directive EMC 89/336/EEC Area of Application Simatic NET CP 243-2 AS-i Master C79000-G8976-C142/02 Simatic Training Center Simatic NET ± Support and TrainingSimatic Customer Support Hotline Nuremberg Johnson City Singapore Simatic Basic Hotline Simatic Premium Hotline Simatic Customer Support Online ServicesFurther Support Glossary AS-i slave AS-i moduleAS-i standard slave Extended AS-i master Standard AS-i master Nibble Glossary-4 Index PICS, A-1