Siemens CP 243-2 Signaling Errors and Diagnostics in the User Program, Command Interface

Contents

4	Signaling Errors and Diagnostics in the User Program		4-1
	4.1	Signaling	4-2
	4.2	Example: Reading the Delta List	4-3
5	Command Interface		5-1
	5.1	Command interface of the CP 243-2	5-2
	5.2	Description of the AS-i Commands	5-7
	5.2.1	Set_Permanent_Parameter	5-13
	5.2.2	Get_Permanent_Parameter	5-14
	5.2.3	Write_Parameter	5-15
	5.2.4	Read_Parameter	5-16
	5.2.5	Store_Actual_Parameters	5-17
	5.2.6	Set_Extended_Permanent_Configuration	5-18
	5.2.7	Get_Extended_Permanent_Configuration	5-19
	5.2.8	Store_Actual_Configuration	5-20
	5.2.9	Get_Extended_Actual_Configuration	5-21
	5.2.10	Set_LPS	5-22
	5.2.11	Set_Offline_Mode	5-23
	5.2.12	Select_Autoprogramming	5-24
	5.2.13	Set_Operation_Mode	5-25
	5.2.14	Change_AS-i_Slave_Address	5-26
	5.2.15	Get_AS-i_Slave_Status	5-27
	5.2.16	Get_LPS, Get_LAS, Get_LDS, Get_Flags	5-29
	5.2.17	Get_Extended_Total_Configuration	5-32
	5.2.18	Store_Extended_Total_Configuration	5-37
	5.2.19	Write_Extended_Parameter_List	5-43
	5.2.20	Read_Extended_Parameter_Echo_List	5-45
	5.2.21	Read_Version_ID	5-47
	5.2.22	Read_AS-i_Slave_ID	5-48
	5.2.23	Read_AS-i_Slave_ID1	5-49
	5.2.24	Write_AS-i_Slave_Extended_ID1	5-50
	5.2.25	Read_AS-i_Slave_ID2	5-51
	5.2.26	Read_AS-i_Slave_I/O	5-52
	5.2.27	Get_LPF	5-53
	5.2.28	Write_AS-i_Slave_Parameter_String	5-54
	5.2.29	Read_AS-i_Slave_Parameter_String	5-55
	5.2.30	Read_AS-i_Slave_ID_String	5-56
	5.2.31	Read_AS-i_Slave_Diagnostic_String	5-57
	5.2.32	Read_Data_and_Delta_List	5-58
6	Dealing with Problems / Error Displays		6-1
	6.1	Replacing a Defective AS-Interface Slave/Automatic Address Programming	. . .
		6-2
	6.2	Error Displays of the CP 243-2 / Remedying Errors	6-3

iv	SIMATIC NET CP 243-2 AS-i Master
	C79000-G8976-C142/02