Panel PC 670 Windows XP | Siemens Panel PC 870 specs

Release 11/02

Connecting and Switching On the Panel PC 670/870

Note

Register an intelligent USB device with the operating system before removing the device using the Unplug or eject hardware dialog.

More information on this is provided in the documentation to your operating system.

Panel PC 670 – Windows XP

The Panel PC 670/870, in centralized design, is equipped with a front side USB interface on the operating unit and two more on the rear side integrated in the computer unit. In its decentralized design, the Panel PC 670/870 is also equipped with a rear side USB interface in the decentralized operating unit.

The USB interface is a flexible and easy way to use standard USB peripheral components.

In this way, for example, an external USB-compliant keyboard and mouse can be connected. If the USB-capable keyboard is also equipped with an external USB port (USB hub), other USB-capable devices (e.g. mouse) can be connected to it.

Notice

When installing a USB device for the first time, please note that the device driver required must be available during installation if it is necessary for operation.

Note

Register an intelligent USB device with the operating system before removing the device using the Unplug or eject hardware dialog.

More information on this is provided in the documentation to your operating system.

Panel PC 670 – Windows 98

The Panel PC 670, in centralized design, is equipped with a front side USB interface and two more on the rear side integrated in the operating unit. In its decentralized design, the Panel PC 670 is also equipped with a rear side USB interface in the decentralized operating unit.

The USB interface is a flexible and easy way to use standard USB peripheral components.

For example, either an external USB-capable keyboard or USB-capable mouse can be connected to this port in additional to the keyboard and mouse already integrated. If the USB-capable keyboard is also equipped with an external USB port (USB hub), other USB-capable devices (e.g. mouse) can be connected to it.

SIMATIC Panel PC 670/870 Start-Up Instructions

2–21

Image 43

Siemens Panel PC 870 appendix Panel PC 670 Windows XP

Contents

Start-Up Instructions Panel PCRelease 11/02 Trademarks Safety GuidelinesQualified Personnel Correct Usage Purpose 1PrefaceDocumentation Trademarks Notation Available worldwide Customer and Technical Support Training Center Simatic Customer Support Online ServicesOther Sources of Assistance Contents Electromagnetic Compatibility General Information Appendix Unpacking and Checking the Delivery Contents Unpacking and Installing Panel PC 670/870 Entering the operating unit number Step Unpacking and Installing the Panel PC 670/870 Release 11/02 Installation notes Installation of the Panel PC 670/870 Installation angle Step Degree of protection and type of fixation Step Step Select installation cut-out Installation cut-out for Panel PC Applies to both centralized and decentralized designs Making the installation cut-out Step Fixation using screw mountings Fixation using clamping saddlesFixation Step Unpacking and Installing the Panel PC 670/870 Release 11/02 Not permitted where an LS240 drive is installed Installation of the Computer Unit An installation angle of ±15 is permitted in this position 11 Dimensions for installation of the computer unit Installation Step Unpacking and Installing the Panel PC 670/870 Release 11/02 Interfaces Connecting and Switching On Panel PC 670/870Computer unit COM AC/DC power supply connectionMouse COM 1/Modem/Programmable Logic Controller PLC Keyboard Operating unitGeneral information Step 13 LPT1 Front view of the operating unit Operating Units with Keypad Fronts Keyboard Operating Units with Touchscreen Fronts Operation Power SupplyConnection Step Panel PC 670/870 in a centralized design ChecklistSwitching on Step Initial Startup License number Selecting the screen resolution Screen resolution and panel type selection Step Panel PC Operating System Power management Special featuresWindows 98 only applies to Panel PC Dhcp utility Windows NT 4.0 TMUSB Keyboardcontroller Service Pack Bios settingsRestrictions Auto Logon Windows Windows XP Operating system not installed Procedure Installing Additional User SoftwareDefragmenting the hard disk Step USB interfaces Use of USB Peripheral Devices Simatic Panel PC 670/870 Start-Up Instructions Panel PC 670/870 Windows Panel PC 670/870 Windows NT 4.0 with USB Stack Panel PC 670 Windows Panel PC 670 Windows XP Simatic Panel PC 670/870 Start-Up Instructions Shut Down Operating the Panel PC 670/870Normal Operation Activation Backup copy of the hard disk drive Data Backup and Restoring the Operating SystemRestore CD Windows NT, Windows Recovery CDWindows 2000, Windows XP \drivers.w98 \drivers.nt4 \drivers.w2k \drivers.wxp Documentation & Drivers CD Touchware settingsModifying touch settings Additional Drivers and Applications Repeat calibration Touch Settings tab control MicroTouch touchscreen properties Select the option 2 Point for Calibration Style If this happens Keypad front File KeypadCall Function Simatic SOM safecard on motherboard Setdisplay TouchInputPC Setbrightness KeyHook 11 CheckLanguageID CheckLanguageID Changing user interface languages Language settings 13 Language setting 14 Standard language Changing the standard language Pulse shaped interference Electromagnetic Compatibility Interference emission Sinusoidal wave interference Pixel number Faulty pixels in displayGeneral Information Disposal FM approval Abbreviations Appendix Appendix Release 11/02