Connecting and Switching On the Panel PC 670/870

Release 11/02

1Mouse

PS/2 socket for connecting a PS/2 mouse.

2COM 1/Modem/Programmable Logic Controller (PLC)

The COM 1 (TTY) interface can be used to connect e.g. S5 PLCs. By implementing the adapter supplied, the interface can also be used as a 25- pin V.24 standard interface to connect devices with a serial interface, such as modem, mouse or printer.

3COM 2

Serial interface 2 (V.24) to connect devices with a serial interface, such as modem, mouse or printer.

4AC/DC power supply connection

Device socket for AC voltage power supply or screw terminals for DC voltage power supply.

5PCI expansion slot

Internal slot for PCI expansion modules.

6PCI/ISA expansion slot

Internal slot for expansion modules.

7ISA slot

Internal slot for ISA expansion modules.

8PC card (Panel PC 670 only)

Connection for PC cards of the type I/II/III.

9Ethernet

RJ 45 Ethernet connection. The Ethernet network is a local network with a bus structure for data communication with data transmission rates of 10 or 100 Mbps.

10PROFIBUS/MPI

Using the potential isolated PROFIBUS/MPI interface, the Panel

PC 670/870 can be connected to an S7 PLC or a PROFIBUS network.

11USB

2 connections for Universal Serial Bus. Using the USB connection, it is possible to connect external devices, such as CD drives, printers, modems or mouse and keyboard. Also refer to Chapter 2.7.

12VGA

A VGA monitor can be connected here.

2–2

SIMATIC Panel PC 670/870 Start-Up Instructions

Page 24
Image 24
Siemens Panel PC 870 Mouse, COM 1/Modem/Programmable Logic Controller PLC, Com, AC/DC power supply connection, ISA slot