User’s Guide
UNPROTECT
If an update password has been defined (SET PROTECT), this command is used to enter the password to allow configuration items to be modified. After entering this command, the server will prompt for the update password. If entered properly, the user will then be able to execute SET commands to modify the server configuration. This lasts only until the console session is terminated with an EXIT command.
UNPROTect
Netware Commands
SET NETW ADvertise
Advertising frequency in seconds
SET NETW ADvertise n (default = 60 sec)
SET NETW ENable
Enable or disable the Netware Protocol
SET NETW [ENable DISable] (default = enable)
SET NETW FRame
Set Netware frame type
SET NETW FRame [802.2 802.3 ETHer AUto SNAp]
(default = AUTO)
SET NETW NPrinter
Set NPrinter mode on service
SET NETW NPrinter <pserver> n ON <service>
SET NETW PAssword
Set password for file server
SET NETW PAssword <psw> (default = <null>)
SET NETW POlling
Document | 66 |
