Rep lacement Bobbins

Only use bobbins purchased through Sears Stores, stock No. 6870 or Sears Service Centers, Parts No. 102869107.

S

J

Bobbin Winding

Removing the hook cover plate Hook cover plate release button

Hook cover plate

Slide the hook cover plate release button _ to the right, and remove the hook cover plate _.

\\

\

\

\

Horizontal spool pin Spool pin

Large spool holder Small spool holder

Lift up the spool pin _. Place a spool of thread on the spool pin with the thread coming off the spool as shown. Attach the large spool holder _, and press it firmly against the spool of thread.

The small spool holder _ is used with narrow or small spools of thread.

Additional spool pin Additional spool pin Spool pin hole Spool pin felt

The additional spool pin _ is for bobbin winding without unthreading the machine and for twin needle sewing. Insert the additional spool pin _ in the hole _.

Place the felt _ and a spool on the pin.

Y

f

J

J

14

Page 25
Image 25
Singer 384. 18028300 owner manual Rep lacement Bobbins, Horizontal spool pin Spool pin