Manual |
| Buttonhole | (option) |
(_ Stitch | selector: | _] (BH) | |
Stitch | width: | 3 to 6.5 | |
Stitch | length: | _._==zone.. | |
Needle | thread tension: | 2 to 6 | |
(_) Presser | foot B (option): | Buttonhole foot | |
• Tosew
If the diameter of the button is more than 1.0'°(2.5 cm), a buttonhole must be made manually as follows:
Turn the handwheel toward you to raise the needle to its highest position. Raise the presser foot.
Set the stitch at" _]" by turning the stitch selector.
Attach the buttonhole foot.
Pull the buttonhole lever downward as far as it will go.
Lower the needle into the garment where the buttonhole is to start, and lower the foot.
Sew the front bartack and left row, then stop.
Click the buttonhole lever toward you.
Sew the back bartack and right row, then stop the machine at the starting point.
To cut the opening and to reset for sewing the next buttonhole, refer to instructions _ and _ on page 60.
S
WIDTH
--m
LENGTH
®
/-
i i
/-
[]
®
®
J
J
J
J
66
