Stitch Length Control

( howto adj ust the stitche length)

Turn the stitch length control until the desired number is shown at the indicating mark.

(Set the stitch length control ar S.S. when using the stretch stitch.) The larger the number, the greater the stitch length. _._==mark,',_ shows the adjustment range when sewing the

buttonhole.

*Raise the presser foot before turning the stitch length control.

Indicating mark

Adj usting Stretch Stitch Balance

If stretch stitch patterns are uneven when you sew on a particular fabric, adjust them with the feed balancing dial.

To adjust distorted patterns.

If patterns are drawn out, correct by turning the dial in the direction of "-".

If patterns are compressed, correct by turning the dial in the direction of"+".

Reverse Stitch Control

Sewing wilt be made in reverse while the reverse stitch

control is pressed.

S

J

J

S

J

28

Page 39
Image 39
Singer 384. 18028300 owner manual Howto adj ust the stitche length, Stitch Length Control, Control is pressed