Show Version ve | Solid State Logic X-Logic Series specs

X-Rack Owner’s Manual

4.4.7Show Version (ve)

Select Show Version by turning the D-Pot till the display shows ‘ve’.

Press the D-Pot to show the software version in thr ee bloc ks. A s an exampl e, sof tware version ‘V1.2/11’ will display in this sequence before returning to display ‘ve’.

4.4.8Set DIM Level (d1)

Select DIM Level by turning the D-Pot till the display shows ‘d1’.

Press the D-Pot to show the current DIM level. The level can be varied from –3dB (‘03’) to –30dB (‘30’). Press the D-Pot once more to change the DIM level.

Page 14

Page 18

Image 18

Solid State Logic X-Logic Series owner manual Show Version ve, Set DIM Level d1

Contents

Page Page Solid State Logic U N D V I S I O N Solid State Logic Contents XLogic Out of Warranty Repairs WarrantyWarranty Repairs Introduction Installation Safety considerationsElectrical Safety Warning Definitions Mains Supply and Phases Graphical SymbolsSafety Considerations Mains Isolation and Over-Current Protection Rack Installation Assembling the X-RackMounting Connection Operation Total Recall Stand-alone ModeExiting Display Mode Saving Stores to Internal Memory AWS Remote Mode Rack Installation and Operation Option Display Setting Setup/MIDI ModeNavigating in the Setup menu Overview Midi m1 Default Midi Controller MappingSaving Setups to a Mac or PC sa Midi Remote Channel ck Write Protect Mode pr Remote Mode re Test LEDs tl Address Setting adTest Mode te Test Pots tp Show Version ve Set DIM Level d1 Software Download and Installation Before continuing see System Requirements overleaf An be downloaded from Rack Connector Details MiscellaneousRack Internal Links and Fuses Rack Connector Details Mix Bus Link Physical Specification Environmental SpecificationPage Line Section F Rack Mic Amp ModuleMIC Section E A-1 3 HF/LF Section G Output Section HA-2 Microphone Amplifier Performance Measurement ConditionsMeasurement References A-3 Instrument Input Performance Line Input PerformanceA-4 A-5 Connector Details A-6 Rack EQ Module Frequency SectionsB-1 B-2 HF Band controls PerformanceCurves HMF Band controls LMF Band controls LF Band controlsB-4 HMF EQ Maximum Gain EQ AlignmentHF EQ Maximum Gain LMF EQ Maximum Gain LF EQ Maximum Gain ‘Balance’ AdaptorB-6 B-7 B-8 Gate/Expander Section Rack Dynamics ModuleCompressor/Limiter Section D-1 D-2 Compressor/Limiter Controls Expander/Gate ControlsD-3 Dynamics Adjustments DistortionD-4 Gate Threshold Compressor ThresholdCompressor Law 7 ‘Balance’ Adaptor D-6 Operation Line Return ModuleIntroduction Rack Line Return Module E-2 Measurement References Performance SpecificationMeasurement Conditions Line Input Performance Line Calibration InformationLine Input E-4 Insert Send/Return Connector DetailsLine E-5 Overall width front and rear panels are offset E-6 Mix Section Master ModuleRack Master Module F-1 Expansion Configuration Dim LevelMonitor Section Midi Remote 600Ω Output Level Compensation Default Midi Controller MappingLevel Compensation F-3 Mix Bus Performance Record Bus PerformanceF-4 Mix Level Tracking Meter Level Ins Snd, Mix, Rec, Fol Mon Connector Details Ins Rtn, Ext, Mon, Alt MonHeadphones F-6 F-7 F-8