Safety Considerations
Mains Supply and Phases
Solid State Logic equipment is designed for connection to single phase supplies with the Neutral conductor at earth potential – category TN – and is fitted with a protective fuse in the Live conductor only. It is not designed for use with Phase (Live) and Neutral connections reversed or where the Neutral conductor is not at earth potential (TT or IT supplies).
Mains cables will be coded with the following colour scheme:
LIVE:Brown
NEUTRAL:Blue
EARTH:Yellow/Green
Mains Isolation and Over-Current Protection
An external disconnect device is required for this equipment; a detachable power cord, as fitted to this equipment, is a suitable disconnect device. Note that the socket outlet used for the detachable power cord should be installed near the equipment and should be easily accessible.
An external
CE Certification
Note that the majority of cables supplied with Solid State Logic equipment are fitted with ferrite rings at each end. This is to comply with current European CE regulations and these ferrites should not be removed. If any of the equipment metalwork is modified in any way the CE certification status of the product may be adversely affected.
Note that a frame or chassis terminal stud (functional earth) has been fitted to this equipment to provide a convenient low impedance bonding point for interconnected equipment, should it be required.
FCC Certification
The XLogic unit has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Instructions for Disposal of WEEE by Users in the European Union
The symbol shown here is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste equipment by handing it over to a designated collection point for recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or where you purchased the product.
2.4 Graphical Symbols
The following symbols may be used either on the product or in this manual:
General hazard – refer to user or serviceElectrical hazard. manual for details.
Protective Earth (ground). | Frame or Chassis terminal. |
(Functional Earth) |
Page 5
