Connector Details, A-6 | Solid State Logic X-Logic Series manual

X-Rack Owner’s Manual

A.5 Connector Details

Audio Input

Location:		Rear Panel

Conn' Type:		XLR Female

Pin		Description
1		Chassis

2Audio +ve

3 Audio -ve

Instrument Input

Location:		Front Panel

Conn' Type:		Mono 1/4" Jack Socket

Pin		Description
Tip		Guitar Input
Sleeve		Chassis

Audio Output

Location:		Rear Panel

Conn' Type:		XLR Male

Pin		Description
1		Chassis

2Audio +ve

3 Audio -ve

A.6 Physical Specification *

Depth:	200mm / 7.9 inches	including front panel knobs, excluding connectors
	275mm / 10.9 inches	including front panel knobs and connectors
Height:	171mm / 6.75 inches
Width:	35mm / 1.4 inches	front/rear panels
	49mm / 1.9 inches	overall width (front and rear panels are offset)
Weight:	260g / 9.5 ounces
Boxed size:	190mm x 290mm x 70mm / 7.5" x 11.5" x 2.5"
Boxed weight:	460g / 16.5 ounces

* All values are approximate

A.7 Environmental Specification

As per X-Rack – see page 19.

Page A-6

Page 30

Image 30

Solid State Logic X-Logic Series owner manual Connector Details, A-6

Contents

Page Page Solid State Logic U N D V I S I O N Solid State Logic Contents XLogic Out of Warranty Repairs WarrantyWarranty Repairs Introduction Installation Safety considerationsElectrical Safety Warning Definitions Mains Supply and Phases Graphical SymbolsSafety Considerations Mains Isolation and Over-Current Protection Rack Installation Assembling the X-RackMounting Connection Operation Total Recall Stand-alone ModeExiting Display Mode Saving Stores to Internal Memory AWS Remote Mode Rack Installation and Operation Option Display Setting Setup/MIDI ModeNavigating in the Setup menu Overview Midi m1 Default Midi Controller MappingSaving Setups to a Mac or PC sa Midi Remote Channel ck Write Protect Mode pr Remote Mode re Test LEDs tl Address Setting adTest Mode te Test Pots tp Show Version ve Set DIM Level d1 Software Download and Installation Before continuing see System Requirements overleaf An be downloaded from Rack Connector Details MiscellaneousRack Internal Links and Fuses Rack Connector Details Mix Bus Link Physical Specification Environmental SpecificationPage Line Section F Rack Mic Amp ModuleMIC Section E A-1 3 HF/LF Section G Output Section HA-2 Microphone Amplifier Performance Measurement ConditionsMeasurement References A-3 Instrument Input Performance Line Input PerformanceA-4 A-5 Connector Details A-6 Rack EQ Module Frequency SectionsB-1 B-2 HF Band controls PerformanceCurves HMF Band controls LMF Band controls LF Band controlsB-4 HMF EQ Maximum Gain EQ AlignmentHF EQ Maximum Gain LMF EQ Maximum Gain LF EQ Maximum Gain ‘Balance’ AdaptorB-6 B-7 B-8 Gate/Expander Section Rack Dynamics ModuleCompressor/Limiter Section D-1 D-2 Compressor/Limiter Controls Expander/Gate ControlsD-3 Dynamics Adjustments DistortionD-4 Gate Threshold Compressor ThresholdCompressor Law 7 ‘Balance’ Adaptor D-6 Operation Line Return ModuleIntroduction Rack Line Return Module E-2 Measurement References Performance SpecificationMeasurement Conditions Line Input Performance Line Calibration InformationLine Input E-4 Insert Send/Return Connector DetailsLine E-5 Overall width front and rear panels are offset E-6 Mix Section Master ModuleRack Master Module F-1 Expansion Configuration Dim LevelMonitor Section Midi Remote 600Ω Output Level Compensation Default Midi Controller MappingLevel Compensation F-3 Mix Bus Performance Record Bus PerformanceF-4 Mix Level Tracking Meter Level Ins Snd, Mix, Rec, Fol Mon Connector Details Ins Rtn, Ext, Mon, Alt MonHeadphones F-6 F-7 F-8

A.5 Connector Details

Instrument Input

A.6 Physical Specification *

overall width (front and rear panels are offset)

Page A-6