E-6 | Solid State Logic X-Logic Series manual

X-Rack Owner’s Manual
X-Rack Owner’s Manual
E.7 Physical Specification *		including front panel knobs, excluding connectors
Depth:	200mm / 7.9 inches	including front panel knobs, excluding connectors
Height:	275mm / 10.9 inches	including front panel knobs and connectors
Height:	171mm / 6.75 inches	front/rear panels
Width:	35mm / 1.4 inches	front/rear panels
Weight:	49mm / 1.9 inches	overall width (front and rear panels are offset)
Weight:	260g / 9.5 ounces
Boxed size:	190mm x 290mm x 70mm / 7.5" x 11.5" x 2.5"
Boxed weight:	460g / 16.5 ounces
* All values are approximate

E.8 Environmental Specification

As per X-Rack – see page 19.

Page E-6

Page 50

Image 50

Solid State Logic X-Logic Series owner manual Overall width front and rear panels are offset, E-6

Contents

Page Page Solid State Logic U N D V I S I O N Solid State Logic Contents XLogic Out of Warranty Repairs WarrantyWarranty Repairs Introduction Installation Safety considerationsElectrical Safety Warning Definitions Mains Supply and Phases Graphical SymbolsSafety Considerations Mains Isolation and Over-Current Protection Mounting Rack InstallationAssembling the X-Rack Connection Operation Total Recall Stand-alone ModeExiting Display Mode Saving Stores to Internal Memory AWS Remote Mode Rack Installation and Operation Option Display Setting Setup/MIDI ModeNavigating in the Setup menu Overview Midi m1 Default Midi Controller MappingSaving Setups to a Mac or PC sa Midi Remote Channel ck Write Protect Mode pr Remote Mode re Test LEDs tl Address Setting adTest Mode te Test Pots tp Show Version ve Set DIM Level d1 Software Download and Installation Before continuing see System Requirements overleaf An be downloaded from Rack Internal Links and Fuses Rack Connector DetailsMiscellaneous Rack Connector Details Mix Bus Link Physical Specification Environmental SpecificationPage Line Section F Rack Mic Amp ModuleMIC Section E A-1 A-2 3 HF/LF Section GOutput Section H Microphone Amplifier Performance Measurement ConditionsMeasurement References A-3 A-4 Instrument Input PerformanceLine Input Performance A-5 Connector Details A-6 B-1 Rack EQ ModuleFrequency Sections B-2 HF Band controls PerformanceCurves HMF Band controls B-4 LMF Band controlsLF Band controls HMF EQ Maximum Gain EQ AlignmentHF EQ Maximum Gain LMF EQ Maximum Gain B-6 LF EQ Maximum Gain‘Balance’ Adaptor B-7 B-8 Gate/Expander Section Rack Dynamics ModuleCompressor/Limiter Section D-1 D-2 D-3 Compressor/Limiter ControlsExpander/Gate Controls D-4 Dynamics AdjustmentsDistortion Gate Threshold Compressor ThresholdCompressor Law 7 ‘Balance’ Adaptor D-6 Operation Line Return ModuleIntroduction Rack Line Return Module E-2 Measurement References Performance SpecificationMeasurement Conditions Line Input Performance Line Calibration InformationLine Input E-4 Insert Send/Return Connector DetailsLine E-5 Overall width front and rear panels are offset E-6 Mix Section Master ModuleRack Master Module F-1 Expansion Configuration Dim LevelMonitor Section Midi Remote 600Ω Output Level Compensation Default Midi Controller MappingLevel Compensation F-3 F-4 Mix Bus PerformanceRecord Bus Performance Mix Level Tracking Meter Level Ins Snd, Mix, Rec, Fol Mon Connector Details Ins Rtn, Ext, Mon, Alt MonHeadphones F-6 F-7 F-8

E.7 Physical Specification *

overall width (front and rear panels are offset)

E.8 Environmental Specification

Page E-6