2 Chapter Menus

Basic Menu Operations

2 Set the value in one of the following three ways:

•Enter the value using the numeric keypad

•Select the value using the UP and DOWN buttons

•Select the value using the PHASE knob

3 Press the ENTER button.

The setting is confirmed (the item is displayed in white text again).

Entering characters

1 Display the setting menu and set the cursor to NEW NAME using the UP and DOWN buttons or PHASE knob.

C H A N N E L N A M E

P R O G

E D I T

C A M

V T R

p N E W N A M E

3 Select the character you wish to enter using the UP and DOWN buttons or PHASE knob. When you press the UP button, or turn the PHASE knob clockwise, characters and symbols appear one by one in the order shown below.

A, B, .............Y, Z, 0, 1, ...............8, 9, ( , ), :, ;, .,

-, +, /, &, CH, (space), ?

If you press the DOWN button or turn the PHASE knob counterclockwise, the characters and symbols appear in the reverse order.

4 Press the ENTER button.

The selected character is entered.

C H A N N E L N A M E

P R O G

E D I T

C A M

V T R

p N E W N A M E C ?

2 Press the ENTER button.

“?” is displayed in yellow. The “?” indicates the position where character input is possible.

C H A N N E L N A M E

P R O G

E D I T

C A M

V T R

p N E W N A M E

?

5 Repeat steps 3 and 4 until all the desired characters are entered, then press the ENTER button.

The entered characters are confirmed, and the screen display returns to that of the upper menu level.

To correct the entered character

Press the Del button on the numeric keypad. The character on the left side of the “?” (in yellow) is deleted. Now you can enter the correct character.

24