Sony BVM-20F1U, BVM-20F1E, BVM-20E1U, BVM-20E1E, BVM-14F1U, BVM-14F1E, BVM-14E1U, BVM-14E1E, BVM-14F5U, BVM-14F5E, BVM-14E5U, BVM-14E5E Using Extended Functions — EXTEND MENU

Using Extended Functions — EXTEND MENU

Overview

2 Chapter

The following 4 functions can be executed with the EXTEND menu.

(1)Restore factory default data for installed boards.

(2)Write monitor setting and adjustment data to the BKM-12Y monitor memory card or read setting and adjustment data from the card.

(3)Restart the monitor.

(4)Automatically adjust the setup level and 100 IRE level of the internal white signal which is used in the COLOR TEMP ADJ menu [B].

Menus

Structure of the SET UP Menu [C] / EXTEND Menu [C7]

Level 1		Level 2	Level 3				Level 4			Level 5
INPUT CONFIGURATION C1
REMOTE C2
PASSWORD C3
SYSTEM CONFIGURATION C4
ON SCREEN SET C5
ALIGNMENT C6
EXTEND MENU C7	ENTER PASSWORD		RE-LOAD FACTORY				SLOT1 CONTROL
		C71	DATA	C711			SLOT2 SDI 4:2:2/4 FSC1)
							SLOT6 VIDEO AMP		C7111	Confirmation
							SLOT7 DEFLECTION			message2)
							SLOT9 POWER
							SUPPLY
			MEMORY CARD				BACK UP SYSTEM
			C712				DATA	C7121
							RE-STORE SYSTEM			Confirmation
							DATA	C7122
			RE-START MONITOR							message3)
			C713
			ADJ INT SIGNAL
			C714
1) This is displayed when the BKM-21D is installed in the SLOT 2.					3) A message appears, requiring your confirmation. If you select
2) A message appears, requiring your confirmation. If you select						OK, data is read out from the monitor memory card. If you
OK, data is reset and the monitor is automatically turned off and						select CANCEL, then you will be back in the MEMORY CARD
on again. If you select CANCEL, then you will be back in the						menu [C712] .
RE-LOAD FACTORY DATA menu [C711].

48