Preset Adjustment of the Picture Level Control Knobs — CONTROL PRESET ADJ Menu

2 Chapter Menus

[A11] MANUAL menu

Adjust values by turning the PHASE, CHROMA, BRIGHT, and/or CONTRAST knobs. After the adjustment, press the ENTER button to confirm the adjusted values.

PHASE: xxxx

CHROMA: xxxx

BRIGHT: xxxx

CONTRAST: xxxx

When you want to erase characters from the screen while adjusting manually

Press the [F1] button. The characters disappear. To display the characters again, press the [F1] button again.

To reset the setting to the default

Press the corresponding MANUAL button. The adjusted value is reset to 1000 (default).

[A12] AUTO menu

Select the color bar signal to be used for automatic adjustment. ÷Adjustment is carried out.

FULL FIELD CB 100: 100% full-field color bar

FFCB 75 (WHITE 100): 75% full-field color bar (with 100% white signal)

SMPTE CB: SMPTE standard color bar

EIA CB: EIA standard color bar

Note

When you execute the AUTO menu, SYNC button should be set to OFF (INT SYNC). EXT SYNC will cause an error abortion of auto adjustment procedure.

[A13] COPY menu

Select the source to be copied from.

OTHER VALUE...: Copy data from another channel or from PRESET setting. ÷[A131]

OTHER MONITOR...: Copy data from another monitor. ÷[A132]

MEMORY CARD...: Copy data from a memory card. ÷[A133]

[A131] OTHER VALUE menu

Choose either PRESET or CH SET. ÷Copy is carried out.

PRESET: Copy common data.

CH SET: Copy data set for another channel. Input the number of the channel from which the data will be copied.

When the input channel number is deleted with the Del button. the number “1” appears instead. Restore the previous setting by pressing the MENU button, then re-enter the channel number. (Setting with the UP and DOWN buttons or PHASE knob is possible without pressing the MENU button.)

[A132] OTHER MONITOR menu

Input the address of the monitor from which the data will be copied. ÷[A1321]

MONITOR ADDRESS: Input the address.

[A1321] MONITOR ADDRESS menu

Choose either PRESET or CH SET. ÷Copy is

carried out.

PRESET: Copy common data.

CH SET: Copy data set for another channel. Input the number of the channel from which the data will be copied.

When the input channel number is deleted with the Del button. the number “1” appears instead. Restore the previous setting by pressing the MENU button, then re-enter the channel number. (Setting with the UP and DOWN buttons or PHASE knob is possible without pressing the MENU button.)

[A133] MEMORY CARD menu

Select the file name. ÷[A1331]

FILE NAME: Select the file name.

[A1331] FILE NAME menu

Choose either PRESET or CH SET.÷Copy is carried out.

PRESET: Copy common data.

CH SET: Copy data set for another channel. Input the number of the channel from which the data will be copied.

When the input channel number is deleted with the Del button. the number “1” appears instead. Restore the previous setting by pressing the MENU button, then re-enter the channel number. (Setting with the UP and DOWN buttons or PHASE knob is possible without pressing the MENU button.)

26