Rear Panel

6Analog input/output connectors

7 Input option slots

8 REMOTE 1 connectors

 

and TERMINATE

 

switch

 

9 REMOTE 2 connector

1 MAIN POWER switch

 

!º ISR connector

2 AC IN connector

 

3 Fuse

 

4 Deflection option slot

 

5 CONTROL UNIT connector

 

(not provided on BVM-

 

14F5U/14F5E/14E5U/

(Illustration: BVM-20F1U/20F1E/20E1U/20E1E)

14E5E)

1 Chapter Overview

1MAIN POWER switch

When turned on, the monitor enters standby mode. By a setting in the SYSTEM CONFIGURATION menu, the monitor can also be set to enter operation mode when the MAIN POWER switch is turned on.

For details of the SYSTEM CONFIGURATION menu, see “Setting the Channel Selection Method and Power-Up Conditions —SYSTEM CONFIGURATION Menu” on page 42.

2AC IN connector (3-pin)

Connects the monitor to an AC power source, via the supplied AC power cord.

3Fuse

Use a T4AH fuse.

4Deflection option slot Slot for future expansion.

5CONTROL UNIT connector (female, D-sub 9- pin)(not provided on BVM-14F5U/14F5E/14E5U/ 14E5E)

Connects a monitor control unit such as the BKM-10R using a straight cable with D-sub 9-pin plugs such as an RCC-5G (not supplied).

AC power cord (supplied)

Cord stopper (supplied)

Plug holder

Attach the cord stopper to the AC power cord, and connect it to the plug holder so that the cord does not come loose.

15