2 Chapter Menus
Convergence Adjustments — ALIGNMENT Menu
Overview
The ALIGNMENT menu is used for adjusting convergence and geometry.
Structure of the SET UP Menu [C] / ALIGNMENT Menu [C6]
Level 1 | Level 2 |
INPUT CONFIGURATION C1
REMOTE C2
PASSWORD C3
SYSTEM CONFIGURATION C4
ON SCREEN SET C5
ALIGNMENT C6 |
|
|
| ROTATION (1/4) |
|
|
| ||
EXTEND MENU C7 |
|
|
| |
|
|
|
| H PIN (2/4) |
|
|
|
| |
|
|
|
| V STATIC CON (3/4) |
|
|
|
| |
|
|
|
| H CV R C (4/4) |
|
|
|
|
Constituent Menus of the SET UP / ALIGNMENT Menu
This section describes the functions of the constituent menus of the SET UP/ALIGNMENT menu.
Notes
•The menu numbers (A, B1, C11 and so on) are not displayed on the monitor screen.
For details of menu numbers, see page 20.
•An arrow (÷) following the description of an item or setting in each menu indicates another menu which appears or an operation which is executed when you select that menu item or setting. If the description of an item or setting is not followed by an arrow, it indicates that selecting the item or setting finishes the setting operation.
[C6](1/4) ALIGNMENT menu (1/4)
Adjust each item with the UP and DOWN buttons or PHASE knob.
ROTATION: Compensates for the screen rotation which occurs when the monitor is installed facing north or south.
H PHASE: Adjust the horizontal picture position.
V CENTER: Adjust the vertical picture position.
H SIZE: Adjust the width of the picture.
V SIZE: Adjust the height of the picture.
V LIN AMP: Adjust the vertical linearity of the picture.
V LIN BAL: Adjust the balance of the vertical linearity of the picture.
VITS BLK: Adjust vertical blanking so that VITS signals are not visible in the upper part of the screen.
SUB CONTRAST: Adjust the center value of the contrast when the image size is changed.
This item cannot be selected when
46