2 Chapter Menus
Adjusting the Color Temperature — COLOR TEMP ADJ Menu
TRIM: Select whether to add the fine adjustment to the original setting (gain and bias set in MANUAL menu [B1]).
APPLY: Adds the fine adjustment to the original setting.
When APPLY is selected, “XX/TRIM” (XX: the selected color temperature among STD, COL1 or COL2) appears on the left top on the COLOR TEMP ADJ menu.
NOT APPLY: Reset the setting to the original setting (gain and bias set in MANUAL menu [B1]).
SIGNAL: Select the white signal to be used for adjustment.
INT: Use an internal signal. Simultaneously with the adjustment of the gain and bias, the 100 IRE and 20 IRE signals are automatically switched.
EXT: Use an external input signal. When adjusting the gain and bias, input the proper signal.
Note
Even if NOT APPLY of the TRIM item is selected, pressing the ENTER button to confirm the adjusted values results in that APPLY will be selected.
32