6Menu operation buttons
UP MENU
DOWN ENTER
MENU button: Press to display the Menus.
UP/DOWN buttons: Press to select the items and setting values.
ENTER button: Press to confirm the items and values entered (Ent button on the numeric keypad 4 has the same function).
1 Chapter Overview
For details of menu operation, see “Basic Menu Operations” on page 22.
7POWER lamp
Lights when the monitor is put into operation mode from standby mode (see STANDBY lamp 8) by pressing the POWER switch 2.
Note
When the STANDBY lamp 8 is blinking, the monitor cannot be put into operation mode (internal data initialization is taking place). Wait until the STANDBY lamp 8 is steadily lit.
8STANDBY lamp
Lights when the monitor is in standby mode. The monitor will be in standby mode under the following conditions:
•The MAIN POWER switch (on the rear panel) is turned on (the STANDBY lamp will blink for a few moments after the switch is turned on, then will light).
•The monitor is changed from operation mode to standby mode by external control.
9OVER LOAD lamp
Lights to warn of CRT overload.
11