SHIFT ON (LEDs of function buttons in orange)
16:9 button: When this button is pushed in (ON), the aspect ratio changes to 16:9, and when set to OFF, the aspect ratio changes to 4:3.
SYNC button: When this button is pushed in (ON), the monitor synchronizes to the sync signal input to the SYNC connectors on the rear panel (EXT SYNC). When set to OFF, it synchronizes to the sync signal included in the signals being monitored (INT SYNC).
Notes
•When INT SYNC is selected, use a component or YC signals including a sync signal on the Y signal, and use RGB signal including a sync signal on the G signal.
|
|
| 16 : 9 | • To monitor serial digital signals, select INT SYNC. | ||
|
|
| SYNC |
|
| |
|
|
|
|
| ||
|
|
| BLUE | BLUE ONLY button: When this button is pushed in (ON), red and green | ||
|
|
| signals are cut, and only the blue signal is displayed as a monochrome | |||
|
|
| ||||
|
|
| ONLY | picture. It makes it easy to adjust CHROMA and to check VTR noise. | ||
|
|
| ||||
MONO | R | R/G/B buttons: When these buttons are pushed in (ON), R(red), G(green), | ||||
|
|
|
| and B(blue) beams are cut respectively. | ||
| APT | G |
|
| ||
COMB | B |
|
| |||
| F1 | F3 | F3/F4 buttons: For future expansion. | |||
| F2 | F4 |
|
| ||
ADDRESS | SAFE | SAFE AREA button: When this button is pushed in (ON), a safe area is | ||||
AREA | displayed on the screen. | |||||
|
|
| ||||
|
|
|
|
| ||
|
|
|
| Note |
| |
|
|
|
| When EXT SYNC is selected, the safe area display possibly may not be | ||
|
|
|
| shown in the correct position. | ||
1 Chapter Overview
13