Charging the battery pack

Getting started

3

1

2

12

,Open the battery/“Memory Stick” cover.

Slide the cover in the direction of the arrow.

•Be sure to turn off your camera when charging the battery pack (page 18).

•Your camera operates with the “InfoLITHIUM” NP-FM50 battery pack (M Series) (supplied). You can use only M Series battery pack (page 146).

Battery eject lever

b mark

2

,Install the battery pack, then close the battery/“Memory Stick” cover.

Insert the battery pack with the b mark facing toward the battery compartment as illustrated.

Make sure the battery pack is firmly inserted all the way, then close the cover.

•The battery pack is easily inserted by pushing the battery eject lever at the front of the battery compartment to the front side.

Jack cover

DC plug

3

AC Adaptor

,Open the jack cover and connect the AC Adaptor (supplied) to the DC IN jack of your camera.

Open the cover in the arrow direction as illustrated above. Connect the plug with the

vmark facing up.

•Do not short the DC plug of the AC Adaptor with a metallic object, as this may cause a malfunction.

•Clean the DC plug of the AC Adaptor with a dry cotton bud. Do not use the dirty plug. Use of the dirty plug may not properly charge the battery pack.

14