–If you perform any invalid operation, the indicator flashes, and the “Night shot” indicator lights for about five seconds.

•While using the NightShot function, you cannot use the following functions:

–AE LOCK

–Shooting with hologram AF

–Shooting with the flash

–Selecting the color reproduction mode

•While the camera is in Multi Burst mode, the NightShot function cannot be used.

•When [Pop-up Flash] is set to [Manual] in the SET UP settings, pop up the flash emitter using

the OPEN (FLASH) switch.

•When attaching the supplied lens hood, infrared ray may be blocked.

•Do not use the NightShot function in bright places (e.g. outdoors in the daytime). This may cause your camera to malfunction.

NightFraming

The NightFraming function enables you to check a subject even at night and then record with natural colors using the flash.

aSet the mode dial to or P.

bPress and hold NIGHTSHOT/ NIGHTFRAMING and select (Night framing) with the command dial.

The flash emitter pops up and the and “Night framing” indicators light

for about five seconds.

80min

8M

101

4

"Night framing"

MAF

cPress and hold the shutter button halfway down.

The focus is automatically adjusted.

dPress the shutter button fully down.

The shutter sounds, the flash strobes and the image is recorded.

To cancel the NightFraming function

In Step 2, select [Off].

•While using the NightFraming function:

–The white balance is set to Auto.

–The metering mode is set to multi-pattern metering.

–The AF range finder frame is not displayed. The centrally-located subject has priority to focus on.

–The AE lock cannot be used.

–If you perform any invalid operation while using the NightFraming function, the indicator flashes and the “Night framing”

indicator lights for about five seconds.

•When [Pop-up Flash] is set to [Manual] in the SET UP settings, pop up the flash emitter using

the OPEN (FLASH) switch.

•When attaching the supplied lens hood, flash light and infrared ray may be blocked.

•When you press the shutter button halfway down, you will hear a sound, but this is not the sound of the shutter releasing. The image is not recorded yet.

•When [Hologram AF] is set to [Off], you may not get a clear focus. Setting [Hologram AF] to [Auto] is recommended (page 35).

•When using the following functions, you cannot use the NightFraming function.

–Manual focus

–Exposure Bracket

–Burst

–Multi Burst

78