dSelect [BRK] (Bracket Step) with b/B, then select the desired bracket step value with v/V.

±1.0EV: Shifts the exposure value by plus or minus 1.0EV.

±0.7EV: Shifts the exposure value by plus or minus 0.7EV.

±0.3EV: Shifts the exposure value by plus or minus 0.3EV.

eShoot the image.

To return to normal mode

In Step 2, select [Normal].

•When [Mode] (REC Mode) is not set to [Normal], you cannot use the Exposure Bracket mode.

•You may not be able to use the Exposure Bracket mode depending on the Scene Selection mode (page 37).

•You cannot use the flash in this mode.

•During shooting in this mode, the images are not displayed on the screen. Compose the image before pressing the shutter button.

•The focus and white balance are adjusted for the first image, and these settings are also used for the other images.

•When the exposure is manually adjusted (page 59), the exposure is shifted based on the adjusted brightness.

•The recording interval is approximately 0.42 second.

•If the subject is too bright or too dark, you may be unable to shoot properly with the selected bracket step value.

•You cannot select shutter speeds of 1/25 second or slower.

Selecting the ISO sensitivity

– ISO

Mode dial: P/S/A/M

You can change the camera’s sensitivity to light. When you select a high-number setting, you can shoot in a dark place. Normally, the ISO sensitivity is set to [Auto]. When set to [Auto], the ISO sensitivity is automatically increased in a dark place.

Multi-selector (v/V/b/B)

MENU

Mode dial

aSet the mode dial to P, S, A or M.

bPress MENU.

The menu appears.

64